KT-100 Autotuner
AT300互換 Kenwood社製無線機専用
1年間無償修理保証
特徴 | Nothing beats the convenience of a dedicated antenna tuner. Matched to
your specific rig, you just press the Tune button on the radio, and the
rig and tuner do the rest: reduces power, transmits a carrier, automatically
matches the antenna to the rig, then restores power and mode. LDG makes
several dedicated tuners using its unique and highly efficient tuning algorithms
that will match virtually any coax fed antenna in seconds. Kenwood makes some great radios; here at LDG we love our Kenwoods, but when they stopped producing the AT-300 tuner, they left us high and dry with no dedicated tuner for the entire Kenwood line. So if you have a TS-2000, TS-50 or TS-480 or any Kenwood rig that is AT-300 compatible, you’re just out of luck. Of course, most any LDG tuner will work just fine with a Kenwood rig, but wouldn’t it be great if you could use that Tune button on the radio, which Kenwood orphaned when they deep-sixed the AT-300? LDG’s new KT-100 serves as a dedicated tuner for Kenwood radios: just press the Tune button on the radio. The LEDs on the front panel indicate tuning status, and will show a match in seconds, or even less of you’ve tuned on or near that frequency before; the KT-100 has 2,000 memories for instant recall of the tuning parameters for your favorite bands and frequencies. If you have an AT-300 compatible Kenwood radio, you can simply plug the KT-100 into your transceiver with the provided cable; the interface powers the tuner, and the Tune button on the radio begins a tuning cycle. The supplied interface cable makes the KT-100 a dedicated tuner for most modern Kenwood transceivers. There are no extra cables to buy, we even include the coax patch cable from the radio to the tuner so it's ready to go right out of the box. Flexible, low cost, easy to use and just right for your Kenwood transceiver, the KT-100 is the latest in a long line of automatic tuners from LDG that fit in right were you need them the most. And like all LDG products, the KT-100 comes with a two-year, fully transferable warranty. Order yours today. |
---|---|
対応機種 |
AT-300を接続できる多くのケンウッド(Kenwood)無線機にご使用できます。 TS-50, TS-480 , TS-570,TS-590, TS-690, TS-850, TS-870,TS-2000,TS-990 LDG社製 屋内用・屋外用オートアンテナチューナーに対応 ケンウッド無線機のCATを使用して、チューナーをコントロールする装置を弊社と日本のアマチュア無線家で作成いたしました。 CATコマンドでSWR値を取得できる無線機に対応することが可能です。 50MHzのチューニング・200Wに対応・TS-480HX(200W機)にも対応 TC-LDGコントローラーは→こちら その他のケンウッドの無線機やリニアアンプとご使用されたい方・TS-480HX(200W機)など200W以上でご使用されたい場合 ・屋外設置型RT/RC-100(100Wモデル),RT/RC-600(600Wモデル) 屋内設置型 Z-11ProII,AT-200ProII以上のモデルでは、キャリアを送信すると自動的にチューニングを取る機能がございますので、特にオプションケーブルが無くてもご使用することが可能です。学習機能がありますので、学習しますと、キャリアを送信すると一瞬でチューニングが完了致します。 |
仕様 |
|
価格 |
定価 52,800円→台数限定特価 29,800円 釣竿アンテナやロングワイヤーなどのアンテナには、オプションのRBA 4:1バランが必要になります。延長ケーブルなどのオプションは、こちらをご覧くださいます様お願い申し上げます。 補修部品 KT100用接続ケーブル(ケンウッド無線機とKT100を接続する為のケーブル) 1,840円 (税込み 1,987円) |
サービス 提供会社 |
LDGエレクトロニクス社 日本総代理店 有限会社 天都 |